The Operating System for Trucking 24/7  +1 (469) 253-7575or we call you →
LIVE · national benchmarks

Dry Van Freight Rates Per Mile

Dry van is the default of American truckload — roughly two-thirds of everything that moves on a trailer moves in one. That ubiquity is exactly why it is the most rate-sensitive equipment on any board: there is a van in almost every market, so the number tracks fuel, season and lane balance far more tightly than scarcity.

Carrier is paid
Typical range
Broker buys → sells
Gross margin
Shipper pays
All-in, before accessorials
Where these numbers come from. These are national benchmark figures, not a proprietary rate panel built from our own transaction history — we say so plainly, because a rate is only useful when you know what stands behind it. Treat them as a sanity check on a quote you have been given, not as a replacement for the specific lane in front of you. Compare all equipment types →
Latest dated dry van report: Dry Van rates — week 33, 2026 → · all weekly market reports →
This page always shows the current benchmark. The dated reports keep the number that was recorded in the week they cover, and are never edited afterwards.

What the dry van rate is actually made of

A single "rate per mile" hides four different things. Brokers and shippers argue about the wrong one all the time, so here is the whole stack, using the live numbers above.

ComponentPer mileWho it belongs to
Line haulThe truck’s core revenue — driver pay, tractor, trailer, maintenance, insurance.
Fuel surchargeMoves with the DOE average. Quoted separately in contract freight, buried inside the number in spot freight. How fuel surcharge works →
Carrier totalWhat actually lands on the carrier’s rate confirmation.
Broker marginCovers coverage work, credit risk, claims exposure and the brokerage’s own cost of doing business.
Shipper paysThe all-in number, before any accessorial actually incurred on the load.

The line haul and fuel split shown is an industry-typical approximation — roughly 78/22 at current diesel levels. On a real load it moves with the lane and the week, which is exactly why fuel is normally quoted as its own line.

What moves the dry van number

Lane balanceA load leaving a market everyone wants to leave pays less. Dallas and Atlanta outbound run soft; a lane heading INTO a low-volume market carries a premium because the truck may deadhead back out.
SeasonQ4 retail and produce season both pull vans off the market. January and February are the floor.
WeightPast roughly 44,000 lb you start limiting which trucks can legally take it, and the rate follows.
Appointment vs FCFSA hard appointment window narrows the pool of trucks that can make it and adds risk of detention. FCFS freight books faster and cheaper.
FuelFuel surcharge moves with the DOE average and is normally quoted separately from line haul. When someone quotes you an "all-in" number, ask what fuel assumption sits inside it.

Dry Van specifications that decide the rate

Most failed bookings are not arguments about money — they are a load that physically does not fit the trailer that showed up. These are the numbers to put in a posting.

Trailer length48 ft and 53 ft; 53 ft is the default for truckload
Inside dimensions~52⁄3 long × 98″ wide × 108″ tall on a standard 53′
Standard pallets26 pallets floor-loaded, 52 double-stacked if the freight allows
Max payload44,000–45,000 lb before you start fighting axle weights
LoadingDock-to-dock, rear doors; some have side doors or logistics posts

Commonly shipped on dry van: Packaged consumer goods, paper and print, non-perishable food and beverage, electronics, apparel, retail replenishment, e-commerce fulfilment, household goods.

What that looks like on a real lane

Benchmark rate per mile multiplied by real lane distance. Useful as a starting point for a conversation, not as a quote — direction, season and appointment requirements all move the true number.

LaneDistanceCarrier getsShipper pays
Chicago, IL → Atlanta, GA717 mi
Los Angeles, CA → Dallas, TX1,435 mi
Columbus, OH → Charlotte, NC426 mi

Distances are practical truck miles and will differ slightly from a car routing. Work out your own cost per mile →

When dry van rates rise and fall

PeriodWhat happens
Jan–FebThe annual floor. Post-holiday volume collapse and every truck is looking for freight.
Mar–MayRecovery. Spring retail resets and produce beginning to pull capacity elsewhere.
Jun–AugSteady. Produce season pulls reefers out of the market, which quietly firms up van.
Sep–NovThe strongest stretch. Retail builds for Q4 and capacity tightens.
DecSharp drop after the second week once holiday freight is in position.

Dry Van or Reefer?

A reefer can haul dry freight, but you will pay reefer money for it. Use a van unless the load genuinely needs temperature control — or unless you need the extra insulation for freeze protection in winter, which is the one honest reason to book a reefer and run it dry.

See reefer rates per mile →

Reading this number from both sides of the load

If you are a broker

Van is where margin is thinnest, because every broker alive can cover it. The money is not in buying cheap — it is in covering fast. A load re-posted three times has already burned the margin you were protecting, and the carriers who saw it twice now price it as a problem lane. Post it once, at a number that moves, with the accessorial terms already written down.

If you are a shipper

If your van quote sits well above the benchmark below, you are usually paying for one of three things: a hard appointment, a slow-loading dock, or a destination nobody wants to run to. Two of those three you can change. Ask the broker which one is driving the number before you accept it — a good one will tell you.

The accessorials that quietly change the real rate

Line haul is the number everyone negotiates. Accessorials are the number that decides whether the lane was actually profitable. LoadBoot publishes its terms rather than renegotiating them load by load, so both sides know before the truck moves.

AccessorialLoadBoot standardWhen it bites
Detention$60/hr after 2 free hoursFour hours at a dock can exceed the whole margin on a short lane.
Layover$250/dayA missed appointment that pushes delivery to the next day.
TONU$250Truck ordered, then the load is not there or does not fit.
LumperReimbursed with receiptGrocery and food distribution, almost every time.

Is this rate profitable for the truck?

Worth knowing whichever side of the load you are on. A broker who understands the carrier’s floor covers freight faster; a shipper who understands it stops wondering why the cheapest quote keeps falling through. Against a typical all-in operating cost of $1.90 per mile for a small carrier, the current dry van benchmark leaves:

Margin over operating cost
Per loaded mile, before deadhead
Deadhead is the part that decides it. A rate that looks healthy on loaded miles can lose money once the truck runs 150 empty miles to reach the pickup. That is why a load with a short deadhead often books faster than a load paying more from further away — and why posting your real pickup location matters more than shaving the rate.

$1.90 is a working average for a one-truck operation. Fleets with newer equipment and better fuel programmes run below it; an older truck with high maintenance can sit well above. Calculate your actual number →

Posting a dry van load that actually covers

Rate is rarely the reason a dry van load sits. It sits because a carrier cannot tell from the posting whether the load is legal on his trailer, how long he will wait, or what he gets paid if it goes wrong. Five things fix most of that.

Give the real weight, not the round numberA load posted at "about 40,000" that scales at 46,200 gets refused at the shipper. Weight decides which trucks are legal on the lane.
Say FCFS or give the appointment windowThis is the single biggest factor in how fast a van load covers. FCFS freight books hours faster because it does not put the driver’s clock at risk.
State dock hours and whether there is overnight parkingA 07:00 appointment with no place to park the night before means the driver has to solve that problem himself, and he will price it in or skip the load.
Name the commodity"General freight" tells a carrier nothing. Some commodities need seals, some need food-grade trailers, and a carrier who finds out at the dock leaves.
Post the accessorial terms with the loadDetention, TONU and lumper in writing on the posting removes the negotiation that otherwise happens by phone after something goes wrong.

Post a dry van load → · Why posting is free for brokers →

Where dry van pays above and below the national number

A national benchmark is an average of very different markets. Direction matters as much as distance — the same lane run the other way can price completely differently.

Versus nationalMarkets
Above nationalNortheast into New England, the Pacific Northwest, and anywhere in the upper Midwest in winter — low outbound volume means the truck risks deadheading out.
Around nationalThe Southeast triangle of Atlanta, Charlotte and Memphis; the Texas triangle; the Chicago–Ohio corridor. Deep freight, balanced flows.
Below nationalOutbound from Los Angeles, Dallas and Atlanta — large surpluses of trucks looking for a way out.

Dry Van rate questions

What is a good dry van rate per mile in 2026?

Compare the carrier number below against your own cost per mile. Most owner-operators need roughly $1.80–$2.00 all-in to break even, so any load at or under that is losing money once deadhead is counted.

Why is my dry van quote higher than the national average?

Averages hide lane direction, appointment requirements and weight. A quote well above the benchmark usually reflects a hard delivery appointment, a low-volume destination, or freight heavy enough to limit which trucks can legally take it.

How many pallets fit in a 53-foot dry van?

Twenty-six standard 48×40 pallets floor-loaded, or up to 52 if the freight can be double-stacked. Weight usually becomes the limit before floor space does.

What is the maximum weight for a dry van load?

Around 44,000–45,000 lb of cargo. The legal gross combination limit is 80,000 lb, and the tractor and trailer account for most of the difference.

How often do dry van spot rates change?

Weekly under normal conditions and daily in a disrupted market. The figures on this page carry the date they were last updated.

Is dry van cheaper than reefer?

Yes, typically 10–20% cheaper on the same lane. A reefer costs more to buy, more to run and carries far higher cargo liability.

Should I book FCFS or an appointment?

First-come-first-served freight books faster and cheaper because it does not constrain the driver’s clock. Use appointments only where the receiver genuinely requires one.

Moving dry van freight?

Posting is free for brokers and shippers — no subscription and no per-post fee. Every carrier who can accept your load has had authority, insurance and safety checked first, every load carries live GPS, and the accessorial terms above are written down before the truck moves rather than argued about after.

Keep exploring

Related services & guides

Get a QuoteGet Started