National benchmark rates per mile for all eight truckload equipment types, for the week of 6 July 2026 to 12 July 2026. Benchmark snapshot recorded 8 July 2026. What moved, what did not, what it means if you are buying capacity and what it leaves the truck that hauls it.
Carrier rate per mile is what lands on the rate confirmation. Shipper rate per mile is the all-in number before any accessorial actually incurred on the load. Every equipment name links to its full rate hub.
This is the earliest benchmark snapshot on record, so there is nothing behind it to compare against and the movement column is empty by definition rather than by omission. It is the baseline the later reports in this archive are measured from.
The assumption when a load does not cover is that the rate is wrong. Frequently it is not. The load is sitting because a carrier cannot tell from the posting whether it is legal on his trailer, how long he is going to wait, or what he gets paid if it goes wrong — and an unanswerable posting gets skipped rather than called about.
Five things fix most of it, and none of them cost a cent. The exact pickup city and ready time, so the carrier can do his own deadhead maths. Real weight and real dimensions, so he knows it is legal on his equipment. Whether it is FCFS or appointment, and the true window. The accessorial terms in writing. And whether hazmat is involved, which is a question that never gets inferred and never gets guessed.
The measurable version of this: a load re-posted three times has already burned the margin the re-posting was protecting, and every carrier who saw it twice now prices your lane as a problem. Posting it once, complete, at a number that moves is cheaper than posting it cheap three times. Posting on LoadBoot is free for brokers and shippers →
July is peak produce and peak construction at the same time. Refrigerated capacity is being pulled out of general freight, which lifts reefer sharply and quietly firms up dry van as a side effect, while flatbed runs on its own construction calendar entirely.
This matters more than the week-over-week column above. A benchmark without a month attached to it is close to meaningless, because the same lane genuinely costs different money in February and October and neither number is wrong. Read the table against the season first and against last week second.
The spread in this table is the useful part, not any single row. Conestoga sits highest this week at $2.75 and Box Truck lowest at $1.65, and the gap between them is roughly what specialised equipment is worth over general freight right now.
Buy against the benchmark, but cover against the posting. A load re-posted three times has already burned the margin the re-posting was meant to protect. Why posting here is free →
Use this as a sanity check on a quote, never as a quote. If your number sits well above the row for your equipment, the usual causes are a hard appointment, a slow dock, or a destination trucks do not want to run to — and two of those three you can change.
Ask the broker which one is driving it before accepting. A good one will tell you, and the answer is frequently worth more than the negotiation. Shipper solutions →
Hold every row against your own cost per mile rather than against the row above it. The gap is not profit; it is what absorbs deadhead, an unpaid wait, and the repair that has not happened yet.
Work out your real number → then come back to this table — it reads completely differently once you have it.
Against a working all-in operating cost of $1.90 per mile for a one-truck carrier — fuel, payments, insurance, maintenance, tyres, permits and the driver’s own pay. The right-hand column is the same margin on a 700-mile run, before deadhead and before any unpaid time at a dock.
| Equipment | Carrier $/mi | Over operating cost | On 700 mi |
|---|---|---|---|
| Dry Van | $2.10 | +$0.20 | $140 |
| Reefer | $2.55 | +$0.65 | $455 |
| Flatbed | $2.65 | +$0.75 | $525 |
| Step Deck | $2.70 | +$0.80 | $560 |
| Conestoga | $2.75 | +$0.85 | $595 |
| Power Only | $1.90 | at break-even | — |
| Hotshot | $2.05 | +$0.15 | $105 |
| Box Truck | $1.65 | −$0.25 | $175 |
None of the numbers above contain accessorials, and accessorials are frequently what decides whether the load was profitable. LoadBoot publishes fixed terms rather than renegotiating them load by load, so both sides know before the truck moves.
| Accessorial | Standard | When it bites |
|---|---|---|
| Detention | $60/hr after 2 free hours | Four hours at a dock can exceed the whole margin on a short lane. |
| Layover | $250/day | A missed appointment that pushes delivery to the next day. |
| TONU | $250 | Truck ordered, then the load is not there or does not fit. |
| Lumper | Reimbursed with receipt | Grocery and food distribution, almost every time. |
Each week one equipment type gets its own dated breakdown — the week’s number applied to real lane distances, what it leaves the truck, and the specification and posting detail that decides whether a load covers at all. This week it is flatbed.
Read the flatbed deep-dive for week 28 → · Flatbed rate hub (evergreen) →
These are national benchmark figures. They are not a proprietary rate index built from our own transaction history, and we say so plainly on every page that carries them, because a rate is only useful when you know what stands behind it. A benchmark is a sanity check on a quote. It is not a quote.
Each report is built from a benchmark snapshot recorded in the week it covers, and the snapshot is never edited afterwards — which is why a report from eight weeks ago still shows the number that was actually recorded then rather than today’s. Week-over-week change is only printed when the two snapshots were built on the same basis. When the basis changed, the cell reads n/c and this page says so, because a percentage across a methodology change measures us, not the market.
What a national benchmark cannot tell you: which direction your lane runs, what the receiving requirement is, how long the dock takes, and how far the nearest truck actually is. Those four things move a real quote more than the national number does. All equipment on one page →
The reports are dated. The hubs are evergreen — specifications, seasonality, regional variation, lane examples and the posting detail for each equipment type, refreshed as the benchmark refreshes.
The national benchmark for the week of 6 July 2026 to 12 July 2026 was $2.10 per mile on dry van, $2.55 on reefer and $2.65 on flatbed, with all eight equipment types listed in the table above. Those are carrier rates per mile; the shipper all-in figure runs roughly 15% higher before accessorials.
Because the previous benchmark for that equipment was built on a different basis, so a percentage would be measuring a change in our own method rather than a change in the freight market. We would rather print nothing than print a number we cannot stand behind.
No. They are national benchmark figures, not a proprietary rate index built from our own booked loads, and we label them that way everywhere they appear. Treat them as a sanity check on a quote you have been given.
Less than most people assume. Week-to-week movement in a national benchmark is largely noise. The seasonal position and the direction your specific lane runs both move a real quote considerably more than the weekly arrow does.
Accessorials. Detention, layover, TONU and lumper fees all sit outside the per-mile number, and on a short lane they can be worth more than the margin. The standard terms are in the table above.
Usually one of three things: a hard delivery appointment, a slow-loading dock, or a destination market trucks do not want to run into. Two of the three are changeable, which is why it is worth asking which one it is before accepting the number.
A new report is published for each week a benchmark snapshot is recorded, and past reports are never edited afterwards — a week-28 report keeps showing the week-28 number. The evergreen market rates page always shows the current figure instead.